Monitor audio Gold W12 subwoofer

Monitor audio Gold W12 subwoofer

For lovers of deep and refined bass notes, the Gold W12 is a must-have addition to any speaker set-up. Every soundtrack is reinforced by the deep and balanced depth effortlessly delivered by our premium subwoofer.

  • Specificaties

    System Format

    Long-throw 12" driver featuring ‘dished’ C-CAM cone. Dual 200 mm ABR (auxiliary bass radiator). Front baffle 36 mm, cabinet 25 mm MDF construction with internal bracing and sealed amplifier compartment

    Lower Frequency Limit

    -3 dB @ 25 Hz / -10 dB @ 20 Hz (Free Field). Music preset (Default): -3 dB @ 19 Hz / -10 dB @ 16 Hz (In Room). Assignable Low Frequency Limit Protection Filter: -3 dB @ 12 Hz

    Upper Frequency Limit

    -3 dB @ 150 Hz

    Drive Unit Complement

    1 x 12" C-CAM subwoofer driver featuring triple suspension and 3" long throw voice coil

    Linear Driver Excursion

    19 mm Peak to Peak,
    Total displacement 1.6 Litres

    Amplifier Output

    600 W

    Amplifier Classification

    Class D with high current Switch mode power supply (SMPSU)

    DSP

    50 MIPS DSP Core giving 512 instructions per sample, 138 dB of dynamic range and 56-bit double precision processing, dynamically updated by an up to 50 MHz MCU

    Digital Conversion

    24 bit/up to 48 kHz ADCs & DACs built into ADAU1701 DSP Core

    LED UI Control Panel

    Adjustable brightness 0% - 100%, configurable auto off feature. Quick access to menu items: Trim & Mute, LPF, Phase, Preset Select

    Global Settings (via SubConnect)

    Display Brightness (0-100%), Dim (to 10% or to Off), Default Preset, Mute Link Outputs, 12 V Trigger Assignment (Power On / Off or Preset select), Input gain (Master -80 to +20 dB, Trim -11 to +11 dB, Mute), Phase (0 – 360 in 15-degree steps), Night Mode Threshold (0 dB to -36 dB), Auto On / Off (Enable Signal Sense, Always On, Time to off 5 – 240 mins)

    User Presets (via SubConnect)

    4 fully configurable user Presets including, Preset Name, LPF Frequency (5 Hz Steps from 20 – 135 Hz), LPF Slope Order (-12 or -24 dB/Oct), Input (Stereo, LFE or Both), Trim Offset (-6 to +6 dB), EQ mode (Impact, Music, Movie or Default), User EQ (6 adjustable filters applied on top of EQ mode), Room EQ (On / Off), Night Mode (On / Off)

    User Equalisation (via SubConnect)

    6 fully controllable EQ filters and 4 default filters with gain offset per preset, Voreinstellungen: Flat / Music / Movie / Impact

    Room Correction EQ

    6 System controlled parametric EQ filters set using advanced detection algorithm. Measurement can be initiated from the control panel or the SubConnect with up to microphone 6 positions (default 2)

    Night Mode

    Night mode, assignable (On or Off) per Preset with global threshold (0 dB to -36 dB). Introduces dynamic range reduction lowering the level of loud sections

    Phase Control

    0 – 360 degrees Increments of 15 degrees with a pure invert at 180 degrees

    Low Pass Filter Alignment

    2nd or 4th order (12 or 24 dB/Octave), Increments of 5 Hz from 35 Hz to 135 Hz

    Auto Sensing Input Requirements

    Line Level >1mV on unbalanced and balanced inputs. Auto Standby feature, adjustable between 5 – 240 minutes in increments of 5 minutes

    Digital Volume Level

    -11 to +11 dB in 1 dB increments, via the control panel. -80 to +20 in 1 dB increments, via SubConnect application

    IR Remote Control Code

    Supplied IR remote. Front facing IR receiver with red LED indication

    SubConnect (PC Application)

    Windows (7 onwards) (32/64 bit) compatible setup application available from the Monitor Audio website. Allows the user to control advanced subwoofer setup features. Settings can be saved while not connected to the subwoofer for off-site setup

    Audio Input/Outputs

    LFE balanced input (XLR), LFE unbalanced input (RCA), stereo unbalanced inputs (RCA). LFE balanced output (XLR), LFE unbalanced output (RCA), stereo unbalanced outputs (link RCA)

    Connection

    12 V Trigger in (3.5 mm mono mini-jack, 6 V threshold), assignable to On/Off or Pre-set change, 3.5 mm Microphone input jack (mic supplied), RJ45 connector supporting RS232 (EIA/TIA - 561, Tx Pin 6, Rx Pin 5, Gnd Pin 4), IR repeater – Output (3.5 mm mono mini-jack), USB – Type B, for connecting to SubConnect PC application and Firmware update

    Electrical Certifications

    CE / CB/ ETL / Fcc / CCC/ ErP (Energy saving compliant)

    Mains Input Voltage

    100 – 120 Vac ~60Hz / 220 – 240 Vac ~50/60 Hz (Manually selected)

    Power Consumption

    Maximum 600 W, Standby <0.5 W (ErP compliance)

    Fuse Type

    20 mm T8AL 250 VAC

    Weight (unpacked)

    26.98 kg (59 lb 8.3 oz)

    External Dimensions (Including Amp, Drivers and Terminals (H x W x D))

    413 x 410 x 433.5 mm (161/4 x 161/8 x 171/16")

    External Dimensions (Including Amp, Drivers, Terminals and Feet (H x W x D))

    445 x 410 x 433.5 mm (171/2 x 161/8 x 171/16")

    Sold As

    Single Unit

2.750,00 €Prijs
Kleur
 

©2019 by TV-Technics. Proudly created with Wix.com