top of page
Anthem MCA225 power amplifier Gen 2
  • Anthem MCA225 power amplifier Gen 2

    Anthem MCA 225 2-channel power amplifier

    Separate home theater components such as the Anthem MCA 225 Gen.2 must have clean power to make their magic come true. Anthem's MCA power amplifiers are available in 2, 3 and 5 channel configurations; and fit perfectly with the AVM 70 and AVM 90 A/V processors, both sonically and cosmetically. Our Gen2 amplifiers bring improvements to internal power supplies and wiring providing greater transparency for dynamically complex material. Background noise is almost completely eliminated thanks to a 120dB signal-to-noise ratio. Power ratings start at 225 watts into 8 ohms and go up to 600 watts into 2 ohms with perfect stability while driving the most demanding speaker loads. Advanced Load Monitoring (ALM) provides protection against clipping and maintains long-term performance and reliability. Our new modernized design integrates beautifully with our AVM AV processors. With high current output and low distortion, you don't just watch movies or listen to music, you experience them.

    Anthem's new MCA power amplifiers are available in 5, 3 and 2 channel configurations and are a perfect match for the AVM 70 and AVM 90 A/V processors, both aurally and cosmetically. Made in Canada, these Gen2 amps offer greater transparency with dynamic complex material. Background noise is almost completely eliminated thanks to a 120dB signal-to-noise ratio. Power ratings start at 225 watts into 8 ohms and go up to 600 watts into 2 ohms with perfect stability while driving the most demanding speaker loads.

    Advanced Load Monitoring (ALM) provides protection against clipping and maintains long-term performance and reliability. High current output and low distortion ensure complete immersion in a movie or music track. And furthermore, the Anthem MCA power amplifiers have a continuous output power at a frequency range of 20 Hz to 20 kHz, <1% THD (all models).

    • Tech specs

      Technical properties

      • Load: 8 Ohm 225W, 4 Ohm 400W, 2 Ohm 600W
      • THD at 100 Watts: 1kHz 0.0010%, at 20kHz 0.015%
      • IMD at 100W (19kHz + 20kHz): 0.0005%
      • SMPTE (60Hz + 7kHz): 0.002%
      • SNR, IEC-A, ref. 225W: 120 dB
      • Frequency response, 20 Hz to 20 kHz open circuit: ± 0.1 dB
      • 8 Ω ± 0.1 dB, 4 Ω ± 0.1 dB, 2 Ω ± 0.2 dB
      • Power bandwidth, -3 dB/200 W/8 Ohm: 90 kHz
      • Rise rate: 30 V/μs
      • Damping factor, 20Hz to 1 kHz: 300
      • Channel separation, 100Hz to 10kHz:>65 dB
      • Input resistance RCA/XLR: 10 kΩ / 15 kΩ
      • Input sensitivity, 225W/8 Ω: 1.5 Vrms
      • Voltage gain: 29 dB
      • Power Consumption: 1.4W Standby, 47W Rest, 350W Typical, 750W
    2.519,00€Price
    Tax Included
    Product Page: Stores Product Widget
    bottom of page